Air fryer wont turn on when plugged in

Air fryer wont turn on when plugged in. Air fryer use is great for many things, from cooking small amounts of food to making crispy treats in large batches.

Although air fryers are tough and simple to use, they may start to experience some issues if they’re used for extended periods.

However, if your air fryer stops working when plugged in, there are red flags you can look out for. If your air fryer won’t turn on after being plugged in, you may have an issue with the power cord or socket. In most cases, the electronics inside the machine are at fault.

Air fryer wont turn on when plugged in

Air fryer wont turn on when plugged in 2022 guide

If your air fryer isn’t working properly, don’t worry! In this article, we’ll cover some potential reasons why this may be happening and some simple steps you can take to fix the issue.

If your air fryer won’t switch on or start after being plugged in, there are several possible causes. A few of these include:

  • Bad outlet
  • Damaged power cord
  • Broken Switch
  • Blown Thermal Fuse

Reason 1: Bad Outlet

If your air fryer has stopped working altogether, it’s important to check the wall outlet first. This is because the outlet may be faulty. If the outlet itself is damaged or has shorted out, then you’ll have to replace it entirely.

Solution: Before doing anything else, unplug your appliance and let it cool down to a safe temperature. Once it’s cooled, pick it up and take it to a different outlet. This should fix the problem.

Reason 2: Damaged Power Cord

Damaged Power Cord

The issue may be with your power cord if your air fryer isn’t starting or turning on. Things like storing it improperly, keeping it tangled, or pressing it against a wall for long periods can cause damage to the cord, which can lead to problems with your appliance.

If the cord is damaged, it may not be able to provide enough power to the air fryer, or it could cause a short circuit that fries the circuit board.

Solution: If the one you’re currently using is at fault and not working properly, the replacement should ideally resolve the issue.

If you have a spare lying around that meets the same amperage and voltage requirements, you can save some money by trying to use that one instead.

Reason 3: Broken Switch

Broken Switch

It may be time to look at your appliance’s internal components if you’ve tried every non-technical fix and none of them have worked.

The activation switch should be checked first; it is typically found at the front of the air fryer.

The majority of activation switches have a dial knob design, although there can be some variations.

A defective switch is most likely to blame if your appliance won’t turn on or start. Be at ease, though! If it turns out that this is the problem, a straightforward replacement will work.

Solution: You must take out the screws on the appliance’s top (or bottom) in order to access the switch. Carefully remove the plastic outer lid of the device with a screwdriver to reveal its inner workings.

You should be able to see the switch behind the exterior dial knob once the lid has been removed. Utilize a multimeter to check for continuity in the switch.

Reason 4: Blown Thermal Fuse

Blown Thermal Fuse

If your air fryer is equipped with a thermal fuse, then you know that it’s responsible for protecting your appliance from overheating.

When the temperature inside the air fryer gets too high, the thermal fuse will cut off all electrical continuity and cause the unit to stop working.

While a blown thermal fuse isn’t necessarily a problem, it could be a sign that there’s something else going on inside your air fryer that needs to be addressed.

Solution: If your fuse has blown, it’s most likely that you have to replace it. This is a very simple task, but too often people become discouraged after the first time they try to change the fuse and give up.

FAQs

Why did my air fryer stop functioning so suddenly?

Some air fryers have the ability to automatically turn off if they become too hot. The mistake most users make is to use too much food inside the basket.

Because when you place something in the basket and the basket is not set tight enough, it will allow air to circulate inside the basket and there is a possibility that your Air fryer may overheat.

Like any other electrical appliance, these products should be treated as part of a home electricity circuit and not just left constantly running even when it’s not in use, especially during a power surge or spike.

Can you fix an air fryer?

If your air fryer has stopped working or is damaged, you should know that it is not an easy job to fix. In most cases, the circuit board is not expensive, but repairing it can be more problematic.

You can use several options when choosing how to repair your air fryer. If you don’t want to keep using your air fryer until there’s nothing wrong with it again, you’ll be much better off if you get a new one!

Conclusion

Overall, most of these models are excellent options, making cooking with air fryers simple and convenient. In case your air fryer should develop a fault, however, rest assured that there is hope. The tips we’ve outlined above will help you with both your newer and older models alike.

Related Guides

Leave a Comment