Keurig is dripping slow. If you love Coffee, you probably bought a Keurig to have it on tap at home. The problem with Keurig coffee makers is that the last cup takes a little longer than all other cups.
Still, it’s not because the K-Cups are struggling to make their way down through hundreds of tiny holes in the filter, and it’s not because your hot water reservoir is running out either!
Read this post to learn exactly why your Keurig might be taking longer than usual to brew your morning coffee and what you can do about it!
Keurig Is Dripping Slow
Here are why your Keurig might be slow and how you can solve them.
1. Blocked Water Line
If you notice that your Keurig is taking longer to brew than it normally should, a common reason could be that your brewer has clogs in its small water lines.
These tiny channels are where the water passes through and gets turned into Coffee. Over time, coffee particles and other such impurities tend to build up inside them.
This alters the taste of your drink and results in your machine not functioning as well as it did when you first bought it.
2. Puncture Needle
If you run into issues with your coffee machine that can’t be repaired, there is usually a way to replace the needle with another one of the same sizes without much hassle.
However, if you need a new part for your Keurig coffee machine, it will save you both time and money to buy a new Keurig instead.
3. Internal Water Line Issue
When your coffee maker is having some issues, the first thing you should do to try and resolve the problem is to take a look inside of it.
Power it down, wait a few minutes, then power it back up again. If resetting the machine doesn’t solve the issue, take things one step further by unscrewing different exterior pieces that can help you better examine the inner workings of your coffee maker.
First, remove the filter basket and other attached parts such as a carafe or water reservoir. Look closely at the needle which moves up and down through any K-Cups you may use to brew your Coffee.
This should be clear if you slide off the lid of where K-Cups are inserted into your machine. Finally, put the top back onto your Keurig. Just follow the directions in reverse to put it all together again!
FAQs
Why is the Keurig machine will not be pumping water?
The most common reason a Keurig machine will not be pumping water is that you have a buildup of calcium or minerals in your Keurig’s water reservoir, which interferes with the pump.
The simplest way to fix this problem is to run some vinegar through the machine – about a quarter cup should do it.
Then repeat the test brew process with plain tap water to clear any remaining vinegar from the system, or you can clean out your Keurig in another way.
How long does a Keurig last?
Most Keurig coffee makers operate for up to five years. In most cases, we recommend replacing the machine before then because the Coffee doesn’t come out piping hot anymore, which means the appliance might not have completely heated all the water and Coffee it needed to do a proper brew.
Conclusion
If your Keurig isn’t making Coffee as fast as it used to, don’t worry! There are a few easy fixes you can take on that could get your Keurig back up and running. The first thing we suggest doing when experiencing Keurig issues is unplugging the machine for about 10 minutes.
This helps the water inside settle and makes sure everything is working correctly. Try using a different K-cup with filters, and clean the needle if there is any residue buildup. Use an old toothbrush to scrub out any clogs and debris from around the screen at the bottom where the water goes through.
Related Guides
